2. Remove the inner door handle (Section 13).
3. Remove the door glass (Section 14).
4. Loosen the front stop bolt. Remove the mounting bolt and unscrew the lift mechanism through the holes in the door. On models with an electric drive, disconnect the connector.
Fig. 15.4a Bolts for fastening the lifting mechanism near the window lifter handle
Fig. 15.4b Bolts for fastening the lifting mechanism guide
5. Before installation, lubricate the contact surfaces with consistent grease. Installation is carried out in the reverse order.
6. Adjust the position of the glass, see Section 14.
[Publication reprinted from the website: hondabook]