Removal and installation
1. Open the back door.
2. Disconnect all rods and wires that will interfere with dismantling the rear door.
3. Mark the position of the door hinge flanges.
4. While an assistant holds the door, unscrew the support posts.
5. Loosen the hinge mounting bolts and remove the rear door.
6. Installation is carried out in the reverse order of removal. Adjustment.
7. Check the fit of the rear door to the surrounding body panels. Adjustment is made by moving the door hinges.
8. The door latch is activated by moving the locks with the fastening bolts released.
Article source on the website: hondabook