2. Remove the drive belt (with air conditioning)
3. Remove the air conditioner condenser fan housing A (with air conditioning).
4. Disconnect the A/C compressor clutch relay connector, then remove the wiring harness. Remove the A/C compressor without disconnecting the hoses from the air conditioner (with air conditioning).
5. Raise the machine to the full height of the lift.
6. Remove the lower engine cover.
7. Drain the engine oil.
8. Remove the exhaust pipe A.
9. Support the oil pan with a jack.
10. Remove the lower reaction rod.
11. Remove the jack.
12. Remove the oil level sensor caps A, then disconnect the oil level sensor connector B.
13. Remove the two bolts securing the wiring harness holder.
14. Remove the lower reaction rod bracket.
15. Remove the air conditioning compressor bracket.
 |
 |
16. Remove clutch basket A and unscrew the two gearbox mounting bolts.
17. Remove the bolts securing the oil pan.
18. Using a flat-blade screwdriver, disconnect the oil pan from the cylinder block at the indicated locations.
19. Remove the oil pan.