1. Remove the oil filter assembly using oil filter wrench A (P/N 04151-RBD-305 or equivalent). Use only a socket wrench for the oil filter to avoid damaging the oil filter plug.
2. Remove the plug from the oil filter element.
3. Install new O-rings A and oil filter element B onto plug C.
4. Apply fresh engine oil around the O-rings, then install the housing onto the oil filter assembly.
5. Tighten the oil filter assembly fasteners using an oil filter wrench (P/N 04151-RBD-305 or equivalent).
Tightening torque: 25 Nm.
(Based on materials from the website HONDABOOK)