Note: Do not scratch the body.
1. Remove the following parts:
- front wheel arch protector as required;
- rear wheel arch protector as required.
2. Remove the side sill panel A.
Remove screw B and fasteners C.
Move the side sill panel back and remove it. The side clips (D, E) remain on the body.
Note: To remove retainer C, pull the inner pin by the edges near line F on its head.
3. Check the clamps for damage or whitening from stress and replace them with new ones if necessary.
4. Install the side clips onto the side sill panel.
5. While holding the panel, insert all the side clips into the door holes, then push down on the panel until the clips snap into place.
6. Reinstall the front and rear wheel arch protectors.
[The original text of the article is located on the website: www.HondaBook.ru]