Note: Use an upholstery tool kit or similar when removing components.
1. Open the front door.
2. Carefully insert the special tool near the upper retainer and press it against the corner trim of the front A-pillar. Be careful not to scratch the body and adjacent parts.
3. Pull the A-pillar corner trim back by hand to release the remaining lower clips, then remove the trim.
4. Install the trim panel in the reverse order of removal. Note the following: Check the clips for damage or stress whitening and replace them with new ones if necessary.
Place the clamps securely in place.
(The original can be found on the resource «HondaBook.ru»)