- Remove the mudguard (A).
- Pull back the inner wing (B) as far as necessary and remove the expansion clamp (C).
- Slide the door sill panel (D) forward and remove it. The side clamps will remain in the body.
- Remove the side clamps from the body.
2. Replace damaged clamps.
3. Insert the side clips into the door sill panel.
4. Position the panel and insert all side clips into the holes in the body, then press the panel until the clips are in place.
5. Insert all expansion clamps.
6. Install the inner fender and mudguard.
[Full version on the source website «hondabook»]