General parameters
| Characteristic | Meaning |
Fuel pressure (at idle speed), kgf/cm² | |
Civic | |
With the vacuum hose of the regulator connected | 2.0÷2.5 |
With the regulator vacuum hose disconnected | 2.7÷3.2 |
Integra | |
Engine B18B1 | |
With the vacuum hose of the regulator connected | 2.2÷2.5 |
With the regulator vacuum hose disconnected | 2.8÷3.3 |
Engine B18C1 produced until 1997. | |
With the vacuum hose of the regulator connected | 2.7÷3.2 |
With the regulator vacuum hose disconnected | 3.4÷3.9 |
Engine B18C1 | |
With the vacuum hose of the regulator connected | 2.7÷3.2 |
With the regulator vacuum hose disconnected | 3.3÷3.8 |
Fuel injection injector resistance, Ohm | |
Civic | Not specified (but should not be zero or infinite) |
Integra | |
1994 and 1995 | 10÷13 |
since 1996 | Not specified (but should not be zero or infinite) |
Fuel level sensor resistance, Ohm | |
Civic (the sensor is secured with a nut) | |
Full tank | 3.5÷5.0 |
Half full tank | 25.5÷39.5 |
Empty tank | 105÷108 |
Civic (the sensor is secured with a retaining ring) | |
Full tank | 2.0÷5.0 |
Half full tank | 25.5÷39.5 |
Empty tank | 105÷110 |
Integra | |
Full tank | 2.0÷5.0 |
Half full tank | 29.5÷35.5 |
Empty tank | 105÷110 |
Tightening force of threaded connections, Nm
| Characteristic | Meaning |
Injector Service Bolt | |
6mm bolt | |
Civic 1996 | 11.8 |
Integra from 1994 to 1996 | 14.9 |
Hollow bolt 12mm (all models) | 34 |
Throttle body mounting bolts/nuts | |
Integra 1994 and 1995 | 19.0 |
All other models | 22 |
Fuel line fastening nuts | 12.2 |