General parameters
| Characteristic | Meaning |
| Foot brake pedal |
|
| Free travel, mm |
|
| Civic | 1.6÷4.8 |
| Integra | 1.6÷5.2 |
| Height, mm |
|
| Models with manual transmission |
|
| Civic | 153.2 |
| Integra | 160.3 |
| Models with AT/CVT |
|
| Civic | 160.3 |
| Integra | 165.1 |
| Parking brake lever travel | See Chapter Routine maintenance |
| Clearance between the vacuum booster pushrod and the master cylinder piston (at a vacuum depth of 508 mm Hg on the amplifier), mm | 0.0÷0.5 |
Disc brakes
| Characteristic | Meaning |
| Minimum permissible thickness of brake pads | See Chapter Routine maintenance |
| Minimum permissible disc thickness | See markings on the disc |
| Maximum permissible value of disc thickness differences (parallelism), mm | 0.015 |
| Maximum allowable disc runout, mm | 0.102 |
Drum brakes
| Characteristic | Meaning |
| Minimum permissible thickness of brake shoe friction linings | See Chapter Routine maintenance |
| Maximum permissible internal diameter of the drum | See markings on drum |
Tightening force of threaded connections, Nm
| Connection type | Meaning |
| Hollow bolt of the union nut for connecting the brake hose to the brake caliper (front and back) | 34 |
| Front Caliper Bolts |
|
| Civic (see identification marking on the caliper body) |
|
| Caliper type 5410 | 33 |
| Support type 2056 | 34 |
| Top bolt | 34 |
| Bottom bolt | 27 |
| Integra |
|
| Models produced from 1994 to 1997 | 31 |
| Models produced since 1998. | 33 |
| Front Caliper Anchor Bracket Mounting Bolts | 108 |
| Rear Caliper Bolts | 56 |
| Wheel cylinder fastening nuts | 9.5 |
| Brake booster mounting nuts | 12.2 |
| Master cylinder mounting nuts | 14.9 |
(The article is based on information from the website: www.HondaBook.ru)