Withdrawal
1. Raise the rear of the vehicle and place on stands. Block the front wheels.
2. Drain the oil from the differential case (see chapter 1).
3. Remove drive axles (see Chapter 8A).
4. Mark the relative position of the driveshaft and differential flanges. Disconnect the fasteners and remove the rear end of the propeller shaft, hang it to the side.
5. Turn off bolts of fastening of differential to a crossbar.
6. Place a jack under the differential cup.
7. Remove the bolts securing the differential to the top bracket and carefully lower the differential to the ground.
8. Disconnect the bracket from the differential.
9. Have further repairs carried out by qualified personnel.
Installation
10. Installation is made in the return to removal order. Fill with oil (see chapter 1).