Engines with carburetor
2. These engines are equipped with two filters: the main one is located immediately behind the fuel tank and an additional one in the engine compartment. Main filter.
3. Raise the vehicle and place it on stands. Remove the filter guard.
4. Remove the clamps from the fuel hoses leading to the filter.
5. Loosen the mounting bolts and lower the filter.
6. Disconnect the hoses, remove the filter.
7. Install in reverse order, observing the orientation of the filter.
Additional filter
8. Remove the clamps and pull the fuel hoses together, then remove the filter.
9. Installation is carried out in reverse order. Observe the orientation of the filter.
Injection engines
10. These engines have one filter located in the engine compartment.
11. Unload the fuel system (see Chapter 4).
12. Loosen the banjo bolt and drain bolt, remove the clamps and remove the filter.
13. Installation is carried out in the reverse order of removal.