Note:
- Before you begin adjusting the rear door, loosen the bolts and nuts slightly.
- The support posts must be removed.
1. Adjust the rear door hinges on the right and left, as well as on the front and rear using the elongated holes.
2. To ensure the tailgate is flush with the body at the sides, rotate the cushions on the edges of the tailgate.
3. Adjust the fit of the rear door to the opening by moving the latch loop.
4. After adjustment, tighten the bolts and nuts securely.
1. rear door hinge; 2. nuts, 8x1.25 mm, 22 Nm (2.2 kgf/m); 3. forward; 4. rear door hinges; 5. cushions on the edges of the rear door; 6. back door; 7. Rear door latch loop; 8. rear door latch; 9. 8x1.25 mm, 22 Nm (2.2 kgf/m)
(Material obtained from the website hondabook.ru)