2. Make sure you know the anti-theft code for the audio system and navigation system, save the custom settings for the audio system.
Disconnect the negative cable from the battery terminals first, then the positive cable. Remove the battery.
3. Remove the battery retaining bracket.
4. Remove the lower engine cover.
5. Remove the oil check bolt A and washer B. Check the fluid condition. If the fluid is contaminated, remove the drain plug C and washer D
6. Install the drain plug with a new gasket.
7. Remove oil check bolt A and washer B.
8. Fill the transmission oil through the special filling hole until the oil flows out through hole A of the oil control bolt.
 |
 |
9. After the oil stops flowing, install the oil control bolt B and a new washer C.
Oil quantity: 2.2 l per oil change; 2.5 l after repair.
Use original Honda manual transmission (MTF) oil. Using the wrong brand of engine oil can make it difficult to change gears because it doesn't contain the right additives.
10. Install oil filler plug A with a new gasket.
11. Install the battery support.
12. Install the battery. Connect the wires to the battery terminals, first the positive (+) wire, then the negative (-).
 |
 |
13. Enter the audio and navigation system codes and tune the radio to the preset stations.
14. Perform the procedure for reconfiguring the electric window control unit.
 |
 |
15. Install the lower engine cover.