2. Disconnect the reverse gear light switch connector, then remove the engine wiring harness cover and harness clips.
3. Remove shift cable retainers A and cotter pins B.
4. Remove shift cables C from the top of the gearbox housing.
5. Remove the rear center console.
6. Remove the front center console.
7. Remove harness retainers A.
8. Remove shift lever cover B.
9. Unclip locks A on shift lever housing B and remove it from groove C.
10. Turn the cables D in the direction of the index arrow as shown and remove them from the shift lever housing.
11. Remove select cable and shift cable as shown.
12. Install shift cable in reverse order.