Examination
CR-V and 4-cylinder Odyssey models
The condition of the high-voltage wires is checked at each engine adjustment or when inspecting the engine in case of troubleshooting. Check the wires for cracks, cuts or other damage to the insulation, as well as the condition of the wire lugs on the coil (ignition distributor) and on candles. Every 96,000 km or 48 months, check the resistance of the wires, for which the wire must be disconnected at the ignition distributor (or coil) and on a candle. The resistance of each of the wires should be no more than 25 kOhm. Replace high resistance wires.
Replacement
CR-V and 4-cylinder Odyssey models
Replace each wire individually, starting with the longest one. Make sure the new wire is exactly the same as the one being replaced. Lay the new wire immediately along its route.