Intermediate drive shaft. 1 - intermediate drive shaft, 2 - thrust ring, 3 - outer retaining ring, 4 - bolt, 5 - oil seal, 6 - retaining ring, 7 - bracket, 8 - bearing, 9 - inner retaining ring, 10 - ring.
2. Tighten the bolts.
Tightening torque - 39 Nm
3. Install the right drive shaft (see section "Front drive shafts").
4. Fill the oil into the manual transmission or the working fluid into the automatic transmission (see the chapter "Maintenance and general check and adjustment procedures").