Removal and installation
1. Remove the windscreen wipers (see chapter "Body electrical equipment").
2. Remove the side outer windshield trim (see section "Windshield").
3. Disconnect the seal from the ventilation grille, use a puller to disconnect the fasteners and remove the seal.
4. Disconnect the clips, carefully pull the passenger side vent grille up, disengage the clips, then pull the grille toward you and disengage the clips from the body. Remove the passenger side vent grille.
5. Disconnect the clips, gently pull the driver's side vent grille up, then pull the grille toward you and disconnect the clips from the body. Remove the driver's side vent grille.
Sedan. 1 - hood seal, 2 - passenger side ventilation grille, 3 - driver side ventilation grille, 4 - clamp.
Hatchback. 1 - hood seal, 2 - passenger side ventilation grille, 3 - driver side ventilation grille, 4 - clamp.
6. Installation is carried out in the reverse order of removal.
(The original can be found on the resource: «www.hondabook.ru»)