Removal and installation the hood ventilation grille (Honda Fit 1)

1. Remove the wiper arms and blades (see chapter "Body electrical equipment").

2. Remove the rear hood seal (A). Disconnect the three clips.

Note: When removing and installing, be careful not to damage the ventilation grille.

3. Disconnect the clips (A and B), carefully pull the passenger side air vent grille (C) upward, disconnect the clips (D and E), then pull the grille toward you and disconnect the clip (F) from the body (G). Remove the passenger side air vent grille.



4. Remove the windshield washer hose (H) from the ventilation grille (C).

5. Disconnect the clips (I, J and K), carefully pull the driver's side air vent grille (L) upwards, disconnect the clips (M) then pull the grille towards you and disconnect the clip (N) from the body (O). Remove the driver's side air vent grille.

6. Installation is carried out in the reverse order of removal.