Reading fault codes
1. Turn the ignition switch to the "OFF" position.
2. Press and hold the air intake actuator switch and the rear window defogger switch, turn the ignition switch to the "ON" position, and release the switches.
1 - indicators, 2 - air intake drive switch, 3 - air conditioner switch, 4 - rear window heater switch.
4. Check that the air intake actuator switch and rear window defogger switch indicators light up.
5. Check that the air intake actuator switch indicator goes out after 2 seconds and the air conditioner switch indicator comes on for about 10 seconds.
6. Read the fault codes on the indicator of the air intake switch drive, see the table " Diagnostics of the air conditioning system (automatic air conditioner)".
If there are no codes, the indicator will not flash.
7. After reading the fault codes, turn the ignition switch to the "OFF" position, correct the fault and repeat the diagnostics.
[The original text of the article is located on the website: www.HondaBook.ru]