Contents: Removal and installation ⇊ Examination ⇊
Removal and installation
1. Remove the sun sensor (A) from the instrument panel and disconnect the connector (B).
2. Install in the reverse order of removal.
Examination
1. Turn the ignition switch to the "ON" position.
2. Measure the voltage between terminals "1" (+) and "2" (-) of the sensor.
3. Make sure the resistance matches the nominal value.
Nominal resistance:
- sensor illuminated - 3.6-3.7 V and more;
- the sensor is not illuminated - 3.6-3.5 V or less.
(Original article on the website hondabook)