1. Loosen the nuts on the appropriate front wheel. Jack up the front of the car and place it on jack stands. Remove the wheel.
2. Remove the front bumper cover (see Removal and installation of front and rear bumper assemblies).
3. Turn out fixing screws and remove locker of an arch of a wheel (see accompanying illustration).
4a. Remove remaining wing bolts (see accompanying illustrations): Attachment behind the headlight assembly.
4b. The block of fastening to the wing of the lower bracket.
4s. The upper part of the rear corner of the wing is attached to the A-pillar.
4d. Upper front fender mounting bolts.
4e. Lower rear fender mounting bolts.
5. Remove fender (it would be wise to use the help of an assistant in order to minimize the risk of damage to surrounding body panels).
6. Installation is carried out in the reverse order.