Transmission oil
Note: Check the oil with the engine off and the vehicle on a level surface.
1. Remove the filler plug, then check the oil level and condition.
2. Oil should be filled to the neck. If the oil level is lower, add oil to the required level, then install the filler plug with a new gasket.
3. If the transmission oil is dirty, remove the drain plug and drain the oil,
4. Install the drain plug with a new gasket and fill the transmission oil to the appropriate level.
Note: The drain plug gasket must be replaced every time the oil is changed.
5. Install the filler plug with a new gasket,
Oil capacity:
- 1.8 l, when replacing
- 1.9 l, with major overhaul
Always use genuine Honda transmission fluid (MTF). Use API grade SG or SH engine oils with SAE viscosity 10W-30 or 10W-40 as a temporary replacement.