Checking the main switch (hatchback type)
1. Remove the driver's door trim.
2.. Disconnect the 12-pin connector from the main switch.
3. Check for conductivity between the terminals according to the table.
Driver's door power window switch
The driver's door electric window switch is integrated with the control unit, so it is not possible to test only the electric window switch.
Perform a power window master switch test instead. If the test does not reveal any defects in the master switch, the driver's power window switch is faulty.
Passenger door power window switch (left hand drive)
Passenger door power window switch (right hand drive)
Checking the main switch (sedan type body)
1. Remove the armrest.
2. Disconnect the connectors from the main switch.
3. Check for conductivity between the terminals according to the table.
Driver's door power window switch
The driver's power window switch is integrated with the control unit, so it is not possible to test only the power window switch. Instead, test the main power window switch. If the test does not reveal any defects in the main switch, the driver's power window switch is faulty.
Passenger door power window switch
Left rear door power window switch
Right rear door power window switch
[The article is based on information from the website: www.hondabook.ru]