Contents: Electric motor ⇊ Limit switch ⇊
Electric motor
1. Remove the roof trim.
2. Disconnect the connector (B) from the sunroof motor (A).
3. Connect the battery to terminals "2" (+) and "1" (-), make sure the hatch opens.
4. Connect the battery to terminals "1" (+) and "2" (-), make sure the hatch closes.
If the operation is not as described, replace the sunroof electric drive.
Limit switch
1. Remove the roof trim.
2. Disconnect the connectors (A, B) from the sunroof electric drive (C).
3. Check for conductivity between the terminals of the limit switch according to the table.
| Hatch position | Conclusions |
| Rising/falling | 1 - 2, 3 - 4 |
| Opens/Closes | 1 -3 |
If the conductivity is not as described, replace the limit switch.