Note: The headlight and turn signal switch operates regardless of the position of the key in the ignition switch.
- a) When you turn the switch handle to the first click (position "ON1"), the side lights, instrument cluster illumination and license plate illumination are turned on.
- b) When you turn the switch knob to the second click (position "ON₂"), the low beam headlights are turned on.
| Handle position | ON1 | ON₂ |
| Headlights | — | ABOUT |
| Dimensions | ABOUT | ABOUT |
| License plate light | ABOUT | ABOUT |
| Instrument cluster illumination | ABOUT | ABOUT |
Caution: To avoid discharging the battery, do not leave the headlights on for a long period of time when the engine is off.
2. To turn on the high beam headlights, press the switch away from you. The operation of the high beam headlights is accompanied by the corresponding indicator on the instrument cluster.
To turn off the high beam headlights and turn on the low beam headlights, return the switch to its original position.
3. To briefly turn on the high beam headlights (high beam headlight alarm) pull the switch towards you until it stops, then release it.
4. To turn on the turn signal, move the switch up or down. The switch will automatically return to its original position after completing the turn. However, when changing lanes, you may need to manually return the switch to the neutral position.
To activate the lane change signal, move the switch up or down until you feel resistance to movement and set it in this position.
5. (Modification). To turn on the front fog lights, turn the bezel to the "ON" position.
The corresponding indicator will light up on the instrument cluster.
6. The hazard warning lights are activated by pressing the switch located as shown in the figure.
Sedan.
Hatchback.
The article was copied from the website www.HondaBook.ru