2. Using a slotted screwdriver, remove the lamp shades.
3. Loosen the bolts and remove the local lighting lamp (B).

4. Disconnect the connector (A).
Local lighting lamps - 2x8 W
5. Check the conductivity between the terminals of the local illumination lamp according to the table.
| Switch position | Conclusions | |
| Left lamp | ON | 2 - mass (lamp) |
| OFF | - | |
| Right lamp | ON | 2 - mass (lamp) |
| OFF | - | |
If the conductivity does not match the description, replace the local illumination lamp.
6. Install in the reverse order of removal.
Original published on this resource HONDABOOK.ru
