Note: You can register three transmitters, when registering the fourth transmitter, the code of the transmitter that was registered first will be erased.
1. Turn the ignition switch to the "ON" (II) position.
2. Within 1 - 4 seconds, press the "LOCK" or "UNLOCK" button on the transmitter.
3. Within 1-4 seconds, turn the ignition switch to the "OFF" position.
4. Within 1-4 seconds, turn the ignition switch to the "ON" (II) position.
5. Within 1 - 4 seconds, press the "LOCK" or "UNLOCK" button on the transmitter.
6. Within 1-4 seconds, turn the ignition switch to the "OFF" position.
7. Within 1 - 4 seconds, turn the ignition switch to the "ON" (II) position.
8. Within 1-4 seconds, press the "LOCK" or "UNLOCK" button on the transmitter.
9. Within 1-4 seconds, turn the ignition switch to the "OFF" position.
10. Within 1-4 seconds, turn the ignition switch to the "ON" (II) position.
11. Within 1-4 seconds, press the "LOCK" or "UNLOCK" button on the transmitter.
12. Make sure that the electric door locks have worked.
13. Within 1 - 4 seconds, press the "LOCK" or "UNLOCK" button on the transmitter.
14. Within 10 seconds, you can register 2 more transmitters by pressing the "LOCK" or "UNLOCK" button on them. If registration is successful, the door locks will operate.
15. Turn the ignition switch to the "OFF" position and remove the key.
Original article on the website www.hondabook.ru