Attention:
- to prevent electric shock, replace gas discharge lamps in a dry room, dry your hands thoroughly before starting work;
- when the headlights are turned on, high voltage is supplied to the gas discharge lamp socket, do not touch the socket with your hands;
- the lamps become very hot during operation, contamination of the lamp surface will cause excessive heating of the lamp surface and its service life will be reduced, when replacing the lamp, hold it by the metal base, not by the glass.
1. Turn the light switch to the "OFF" position and disconnect the cable from the negative battery terminal.
2. Remove the air conditioner tube from the retainer (sedan).
3. Turn the adjusting bolt counterclockwise 8 turns.
4. Using the TORX key (T20), unscrew the bolt (A) and remove the cover (B).
5. Turn the socket (A) clockwise and disconnect it, disconnect the lamp retaining spring (B) and remove the lamp (C).
6. Install in the reverse order of removal.
7. Adjust the headlights if necessary.
[Original article on the website «www.hondabook.ru»]