2. Disconnect the connectors from the solenoid valves B and C for regulating the pressure in the automatic transmission clutches.
3. Unscrew the mounting bolts, remove the brackets for the harness clamps and remove the solenoid valves B and C for regulating the pressure in the automatic transmission clutches.
4. Disconnect the ATF connecting pipes (D), remove the O-rings (E) and gasket (F).
5. Clean the mounting surface and fluid channel on the solenoid valves B and C for regulating the pressure in the automatic transmission clutches and on the gearbox housing.
6. Install a new gasket on the gearbox housing and connect the ATF connecting pipes.
7. Install new O-rings on the ATF connecting pipes.
8. Install new solenoid valves B and C for regulating the pressure in the automatic transmission clutches and brackets for the harness clamps.
9. Check if there is any rust, dirt or oil on the connectors of the A/T clutch pressure control solenoid valves B and C, then securely connect the connectors.
10. Install the air cleaner housing.