2. Disconnect the connector from the solenoid valve A for regulating the pressure in the automatic transmission clutches.
3. Unscrew the mounting bolts and remove the solenoid valve A for regulating the pressure in the automatic transmission clutches.
4. Disconnect the ATF pipe (B), ATF connecting pipes (C), O-rings (D) and gasket (E).
5. Clean the mounting surface and fluid channel on the solenoid valve A for regulating the pressure in the automatic transmission clutches and on the gearbox housing.
6. Install a new gasket on the transmission case and connect the ATF pipe and ATF connecting pipes.
7. Install new O-rings on the ATE connecting tubes
8. Install a new solenoid valve A for regulating the pressure in the automatic transmission clutches.
9. Check if there is any rust, dirt or oil on the connector of the A/C clutch pressure control solenoid valve A, then securely connect the connector.
10. Install the air cleaner housing.