Vehicle engine cooling and lubrication Honda CR-V 1

Radiator — removal and installation
CR-V and 4-cylinder Odyssey 1. Drain the coolant. 2. Disconnect the upper and lower hoses from the radiator. 3. On vehicles with automatic transmission, disconnect the cooling hoses from the radiator and plug the holes....

Cooling system fan — removal and installation
1. Disconnect the battery from ground. 2. Disconnect the wiring connectors from the fans. 3. To expand the working space, it is recommended to drain about 3 liters of liquid and remove the upper radiator hose. 4. On...

Cooling system fan — check
1. Disconnect the connector from the fan (black wire - ground, colored wire with stripes - power). 2. Connect the fan to the battery with a wire with a 30 A fuse, connect the second terminal of the fan to ground. 3. If...

Coolant pump — removal and installation
Removal 1. Disconnect the battery from ground. 2. Drain the coolant. 3. Remove the camshaft belt. 4. On Odyssey V6 models, remove the camshaft belt tensioner. 5. Loosen the bolts securing the pump to the cylinder block...

Oil Pump (CR-V Models)
Removal 1. Disconnect the battery from ground. 2. Drain the oil from the engine and raise the car. 3. Set the piston of the 1st cylinder to TDC of the compression stroke. 4. Remove the cylinder head cover and the middle...

Oil Pump (4 Cylinder Odyssey)
Removal 1. Disconnect the battery from ground. 2. On some vehicles, remove the TDC sensor mounted on the pump body. 3. Remove the camshaft timing belt drive sprocket from the crankshaft nose. 4. Secure the balance shaft...

Oil Pump (Odyssey V6 Models)
Removal 1. Disconnect the battery from ground. 2. Drain the oil from the engine and raise the car. 3. Set the piston of the 1st cylinder to TDC of the compression stroke (in this case, the marks on the crankshaft and...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Link in different formats to this section

TEXTHTMLBB Code