Steering
| Parameter | Terms and Conditions | Standard or new | Limit | |
| Steering wheel | Play around the steering wheel circumference when turning with the engine running | 0-10 mm | ||
| Starting load on steering wheel circumference with engine running | 29N(3.0Kgs) | |||
| Steering gear | The angle at which the guide rack screw is unlocked | max 20° | ||
| Pump | Pump outlet pressure with shut-off valve closed | 6900-7500 kPa (70-77 kgf/cm²) | ||
| Power steering fluid | Filling capacity Use genuine Honda fluid | when changing fluid | 0.2 l | |
| when repairing the system | 0.72 l | |||
| Drive belt | With automatic regulation | |||
Suspension
| Parameter | Terms and Conditions | Standard or new | Limit | |
| Wheel alignment angles | Collapse | front | 0°00'±45' | |
| rear | -1°00'±45' | |||
| Longitudinal tilt of the pivot axis | front | 1°45'±1° | ||
| Total convergence | front | 0±2 mm | ||
| rear | IN 2±2, mm | |||
| Front wheel steering angle | inner wheel | 39°45'±2° | ||
| outer wheel | 32°30'±1° (reference data) | |||
| Wheel | Rim runout of aluminum disk | axial | 0-0.7 mm | 2.0 mm |
| radial | 0-0.7 mm | 1.5 mm | ||
| Steel disk rim runout | axial | 0-1.0 mm | 2.0 mm | |
| radial | 0-1.0 mm | 1.5 mm | ||
| Wheel bearing | Axial play | front | 0-0.05 mm | |
| rear | 0-0.05 mm | |||
Brakes
| Size | Terms and Conditions | Standard or new | Limit | |
| Parking brake lever | Lever stroke when pulled with a force of 196 N (20 kgf) | 5-9 clicks | ||
| Brake pedal | Pedal height (without floor mat) | 173 mm | ||
| Free play | 1-5 mm | |||
| Master cylinder | Clearance between piston and rod | 0-0.4 mm | ||
| Disc brake | Disc thickness | front | 23.0 mm | 21.0 mm |
| rear | 9.0 mm | 7.0 mm | ||
| Disc runout | front and back | - | 0.10 mm | |
| Disk parallelism | front and back | - | 0.015 mm | |
| Thickness of the pad | front | 11.0 mm | 1.6 mm | |
| rear | 9.0 mm | 1.0 mm | ||
| Rear wheel drum brake | Inner diameter of brake drum | 170 mm | 171 mm | |
| Brake shoe friction lining thickness | 3.2 mm | 1.0 mm | ||
| Brake booster | Fluid pressure in the master cylinder when pressing the brake pedal with a force of 98 N (10 kgf) | at a vacuum of 0 kPa (0 mmHg.) | 1040 kPa (10.8 kgf/cm²) | |
| at a vacuum of 40 kPa (300 mm Hg.) | 7129 kPa (72.7 kgf/cm²) | |||
| at vacuum 66.7 kPa (500 mmHg.) | 11248 kPa (114.7 kgf/cm²) | |||
Air conditioner
| Parameter | Terms and Conditions | Standard or new | Limit | |
| Coolant | Type | HFC-134a(R-134a) | ||
| Filling capacity of the system | 650-700 g | |||
| Lubricating oil | Type | ND-OIL8 | ||
| Filling capacity of components | capacitor | 50 ml | ||
| evaporator | 40 ml | |||
| tube and hose | 10 ml | |||
| compressor | 160-175 ml | |||
| Compressor | Excitation coil resistance | at 20°C | 3.9-4.3 Ohm | |
| Clearance between pulley and pressure plate | 0.35-0.6 mm | |||
(The original is located on the website «HONDABOOK.ru»)