Contents: Top cover ⇊ Bottom cover ⇊
Top cover
1. Disconnect the battery from ground.
2. Remove the cylinder head cover, remove the upper belt cover.
3. Remove the seal from the groove in the lid.
4. When assembling, secure the seal in the groove, lubricating it with sealant.
Bottom cover
1. Disconnect the battery from ground.
2. Remove the drive belts of the attachments.
3. Remove the crankshaft pulley.
4. Remove the lower belt cover.
5. Remove the seal from the groove in the lid.
6. When assembling, secure the seal in the groove, lubricating it with sealant.
7. Installation is carried out in reverse order.
(Original material on the website: Hondabook.ru)