Contents: Removal ⇊ Installation ⇊
Removal
1. Loosen the wheel mounting bolts.
2. Raise the car.
3. Unscrew the suspension rod nut on the subframe.
4. Unscrew the suspension rod fasteners on the lower arm.
5. Remove the barbell.
Installation
6. Lubricate the front rod bushings with silicone grease.
7. Install the bushings with the narrow end facing outward, with the larger bushings installed on the front of the subframe and the smaller bushings on the rear.
8. Install the washer on the rod, then the bushing. Install the rod through the lower subframe bushings. Place the washer on and tighten the new nut.
9. Then the installation is carried out in reverse order. Tighten the bolts to the specified torque.
(The text of the article is available on the website «Hondabook.ru»)