CR-V and 4-cylinder Odyssey
1. Remove the inner door panel and plastic screen.
2. Remove the lock switch rod bracket and disconnect the rod.
3. Remove the U-bracket and remove the lock drum switch.
4. On 4-cylinder Odysseys, unscrew the screw securing the switch.
5. Turn away bolts and remove the external handle.
6. Remove the bracket from the inner lock handle rod and disconnect the rod. When assembling, replace the bracket.
7. Installation is carried out in the reverse order.
6-cylinder Odyssey
1. Raise the glass.
2. Remove an outside mirror.
3. Remove the internal panel of a door and the plastic screen.
4. Remove the rubber guide from the bracket, unscrew the bolt and remove the bracket.
5. Disconnect the rod from the lock, remove the U-shaped bracket, unscrew the screw and remove the drum switch of the lock.
6. Installation is carried out in the reverse order.