CR-V
1. Remove the inner panel of the back cover.
2. Disconnect the connector.
3. Mark the position of the lock on the cover, unscrew the bolts and remove the lock.
4. Installation is carried out in reverse order.
4-cylinder Odyssey
1. Remove the side and bottom inner panels of the rear cover.
2. Loosen the lock mounting screws, disconnect the rods and connector from the lock and remove the lock.
3. Installation is carried out in reverse order.
6-cylinder Odyssey
1. Remove the inner panel of the back cover.
2. Disconnect the cable and rods from the lock and remove the wiring fastening bracket.
3. Loosen the mounting bolts, disconnect the connector from the lock and remove the lock.
4. Installation is carried out in reverse order.
(The article is based on information from the website HondaBook.ru)