2. Remove the door glass.
3. Remove the window lifter.
4. On CR-V and 4-cylinder Odysseys, mark the position of the drive gear relative to the window regulator before removing the actuator.
5. On 6-cylinder Odysseys, the window regulator and electric drive are a non-separable structure. 6. Installation is performed in the reverse order. On CR-V and 4-cylinder Odysseys, lubricate the window regulator rollers and all moving surfaces. Install the window regulator roller so that the rectangular hole faces the rear. On 6-cylinder Odysseys, lubricate the sliding surfaces. After installation, check the operation of the window lift. Adjust if necessary.