Contents: Front bumper ⇊ Rear bumper ⇊
Front bumper
1. Disconnect the battery from ground.
2. Remove the radiator grille (see below).
3. Pry up and remove the clips along the top of the bumper (photo).
4. Remove the self-tapping screws from the bottom and back of the bumper, just in front of the wheel arch.
5. Unscrew the 3 special bolts on the left and right sides of the bumper, as well as in the central part of the lower air intake.
6. With the help of an assistant, remove the bumper.
7. Installation is carried out in reverse order.
 |
 |
 |
 |
Rear bumper
1. Disconnect the battery from ground.
2. Open the rear door.
3. Pry and remove the clips along the top of the bumper and along the lower rear edge.
4. Remove the self-tapping screws at the rear of the mud deflectors and in the upper corner of the bumper on the wheel arch side.
5. Unscrew the 2 special bolts in the left and right corners of the bumper near the rear door seal.
6. Remove the bulb holders from the side turn signal repeaters.
7. With the help of an assistant, remove the bumper.
8. Installation is carried out in reverse order.
 |
 |
Article source on the website HondaBook.ru