2. Disconnect the battery from the ground.
3. Outline the hood hinges.
4. Disconnect the washer hoses and wires that may interfere with the removal of the hood.
5. Ask the assistant to hold a cowl, turn away bolts of fastening of loops to a cowl and remove a cowl.
6. Installation is carried out in the reverse order. Align the marks made during removal and tighten the hinge bolts. Adjust the hood if necessary.
Adjustment
1. Loosen the hinge bolts (to the hood or to the body) and move the hood to the desired position, after which the bolts are slightly tightened.
2. When properly adjusted, the hood should be flush, and the gap with adjacent body panels around the entire contour of the hood should be the same. Repeat the adjustment if necessary. Additional adjustment is provided by gaskets under the hinges. After completing the adjustment, tighten the bolts. It is forbidden to adjust the hood by moving the latch.
3. Height adjustment of the hood from the side of the lock is achieved by rotating the rubber buffers.