Contents: Front bumper ⇊ Rear bumper ⇊
Front bumper
1. Disconnect the battery from ground.
2. Remove the bolt and screw at the bottom of the bumper, which are located just in front of the wheel arch (the screw secures the bumper to the rear lower edge).
3. On the Odyssey V6, remove the grille, remove the clips and pins at the bottom of the bumper.
4. On 4-cylinder Odysseys, remove the bolts securing the bumper to the lower side brackets at the edges of the lower air intake.
5. Push the bumper forward by the sides.
6. With the help of an assistant, remove the bumper.
7. Installation is carried out in reverse order.
Rear bumper
1. Disconnect the battery from ground.
2. Open the rear door.
3. Pry and remove the clips along the top of the bumper and along the lower rear edge.
4. Remove the self-tapping screws in the upper corner of the bumper on the wheel arch side.
5. On the Odyssey V6, remove the bracket from the edge of the wheel well, unscrew the self-tapping screws on the sides of the bumper at the top, remove the 4 plugs and unscrew the bolts.
6. With the help of an assistant, lift the bumper by the sides and remove it.
7. Installation is carried out in reverse order.