Mirror assembly
1. Disconnect the battery from the ground.
2. Lower the door glass and release the triangular mirror trim from the latches by hand.
3. Disconnect the connector.
4. Turn away bolts of fastening and remove a mirror.
5. Installation is carried out in the reverse order.
Mirror optical element
1. By hand, feed the frame of the mirror by the bottom edge.
2. Gently pull on the bottom edge of the mirror until the optic comes out of the drive latches
3. If the hooks are stuck on the mirror holder, then move them to the drive.
4. Align the latches and the hooks and, while pressing evenly on the mirror, the holder into the base of the drive. Check the operation of the mirror drive.