CR-V
1. Disconnect the battery from ground.
2. Using a flat, thin tool, pry up and remove the plastic cover on the top of the grille emblem.
3. Using a sufficiently long screwdriver, remove the screws from the grille mounting eyes in the upper and lower central parts. Then remove the lower screws on the right and left sides of the grille.
4. Carefully feed and remove the grill.
7. When assembling, first install the grille on the latches, aligning the holes, then tighten the screws. Install the emblem.
4-cylinder Odyssey
1. Disconnect the battery from ground.
2. Unscrew the nuts, remove the latches and remove the grille.
3. Installation is carried out in reverse order. Tighten the nuts, making sure that the grille is securely held by the latches.
6-cylinder Odyssey
1. Disconnect the battery from ground.
2. Remove the front trim clips (the latches consist of a pin and a sleeve) and remove the cover.
3. When assembling, replace any latches that were damaged during removal.
 |
 |
 |
 |