2. Check the brake lines for damage, rust and leakage. Also check if the tubes are bent.
3. Check for leaks at the joints of hoses and tubes or fittings and tighten if necessary.
4. Check master cylinder, metering valve and ABS modulator assembly for damage and leakage.
Note:
- When servicing the brake hoses, replace the brake hose clamps.
- The illustration shows a left-hand drive model; the location on the right-hand drive model is symmetrical.
1. ABS MODULATOR ASSEMBLY to BRAKE PIPE, 15 Nm (1.5 kgf/m)
2. 4-WAY FITTING TO BRAKE PIPE, 15 Nm (1.5 kgf/m)
3. MASTER CYLINDER to BRAKE PIPE, 15 Nm (1.5 kgf/m)
4. BRAKE PIPE to BRAKE HOSE, 15 Nm (1.5 kgf/m)
5. BRAKE PIPE to WORKING CYLINDER, 15 Nm (1.5 kgf/m), BLEEDER, 7 Nm (0.7 kgf/m)
6. BRAKE PIPE to BRAKE HOSE, 15 Nm (1.5 kgf/m)
7. BRAKE HOSE to FRONT WHEEL BRAKE CALIPER, 34 Nm (3.5 kgf/m), BLEEDER, 9 Nm (0.9 kgf/m)
8. DOSING VALVE to BRAKE PIPE, 15 Nm (1.5 kgf/m)
9. Without ABS