Note: Be careful not to damage the differential cup when removing the seals.
2. Press in the seals (A) without tilting using a special tool. Do not damage the edges of the seals. Right side: The seal press-in depth is 9 mm below the end of the differential housing assembly.
Right side: The seal press-in depth is 9 mm below the end of the differential housing assembly.
Left side: Press the seal (A) flush with the edge of the differential assembly cup.
3. Remove the oil seal (A) from the differential torque distributor housing (B).
Note: Do not damage the shaft or crankcase when removing the oil seal.
4. Press in the oil seal (A) without tilting it using a special tool. Do not damage the oil seal lip.
