Installing the rear differential (Honda CR-V 2)

1. Install the rear differential support assembly (A) to the rear differential assembly (B).



2. Place the rear differential on a jack and raise it to the required height for assembly.

3. Install new snap rings (A) onto the drive shafts, then insert the drive shafts into the rear differential.



4. Raise the rear differential to the required height, then insert both drive shafts, securing the retaining rings. Connect the breather tube (B).

5. Install washers (A) and tighten the rear differential assembly mounting bolts (B).



6. Install the right and left rear differential support brackets (A), then tighten the bolts (B) and shock absorber (C).





7. Install the EVAP carbon canister assembly with the bracket.

8. Attach propeller shaft No. 2 (A) to the rear differential (B), aligning the marks (C), and install new mounting bolts (D).



9. Fill the rear differential with DPSF fluid to the required level.