Location of crankshaft markings on the cylinder block
1. On the end surface of the cylinder block there are numbers, letters or dashes stamped which indicate the diameter of the 5 main journals. Write down the crankshaft marking.
Note: If the markings cannot be read due to dirt or dust accumulation, do not scrape them with a wire brush or scraper. Clean them only with solvent or detergent.
Location of main journal markings
2. The main journal markings are stamped on the crankshaft.
3. Select bearings with the required size from the table on the right using the crankshaft marking and the main journal marking.
Note:
- The color marking is located on the edge of the bearing.
- If different colored liners are used, the color of the top or bottom one does not matter.
Based on materials from the website: Hondabook.ru