Power Steering Fluid Replacement (Honda CR-V 2)

Check the reservoir (A) periodically and top up with the recommended fluid if necessary. Use only Genuine Honda Power Steering Fluid. Use of other fluids or automatic transmission fluids may cause increased wear or poor steering control in cold temperatures.

System filling capacity:

Right hand drive models	0.72 l when disassembled
Left hand drive models	0.75 l when disassembled
Tank capacity	0.26 l

1. Lift the tank, disconnect the return hose (A) and empty the tank. Do not spill liquid on the body or other parts. Wipe up any spilled liquid immediately.



2. Connect a hose (B) of suitable diameter to the disconnected return hose and lower the end of the hose into a suitable container.

3. Start the engine, let it run at idle speed and turn the steering wheel from lock to lock several times. Stop the engine when fluid stops flowing from the hose. Dispose of liquid.



4. Connect the return hose to the tank.

5. Fill the tank to the upper level mark (C).

6. Start the engine, let it run at idle speed, then turn the steering wheel from lock to lock several times and release air from the system.

7. Recheck the fluid level and top up if necessary. Do not fill the tank above the upper level mark.