Warning! Use only Genuine Honda Power Steering Fluid (V, II or S). The use of other fluids, such as ATF or power steering fluid from other manufacturers, will damage the system.
System capacity:
- Left hand drive: 0.61 liters when disassembled
- Right hand drive: 0.65 liters when disassembled
1. Raise the reservoir, disconnect the return hose and empty the reservoir. Do not spill liquid on the body or other parts. Wipe up spilled liquid immediately.
2. Connect a hose of the correct diameter to the disconnected return hose and dip the end of the hose into a suitable container.
3. Start the engine, let it run at idle speed. and turn the steering wheel from lock to lock several times. Stop the engine when fluid stops flowing from the hose. Dispose of the liquid.
4. Connect the return hose to the tank.
5. Start the engine, let it run at idle speed, then turn the steering wheel from lock to lock several times and bleed air from the system.
6. Recheck the fluid level and top up if necessary. Do not fill the tank above the top level mark.