Note:
- Wear protective gloves.
- Avoid scratching the body and adjacent components.
1. Remove the following components:
- Front inner wing.
- Wing panel.
2. Disconnect the hood release cable (A) from the hood latch (B) and remove the bolts (C), then remove the hood release handle (D).
3. Using a clamp remover, remove the clamps (E) and remove the cable from the clamp (F). Remove the rubber bushing (G) from the body, then remove the hood release cable from the vehicle. Do not bend the cable.
4. Installation of the cable is performed in the reverse order of removal, taking into account the following:
- Replace damaged clamps.
- Place the cable through the hole (H) in the body.
- Make sure the hood opens properly and locks securely.
The text of the article is available on the website: hondabook