Replacing the stabilizer bar (Honda CR-V 2)

1. Raise the rear of the vehicle and support it securely. Remove the rear wheels.

2. Separate the stabilizer links from the stabilizer bar (A) on the right and left.



3. Remove the flange bolts and bushing holders (B), then remove the bushings (C) and stabilizer bar.

4. Installation of the stabilizer bar is performed in the reverse order of removal, taking into account the following:

• When assembling, install new self-locking nuts.
• Make sure the right and left ends of the stabilizer bar are installed on the appropriate sides of the vehicle.
• Align the paint marks (A) on the stabilizer bar with the bushings (B).

• See the procedure for connecting the stabilizer bar to the rods in the section "Replacing the stabilizer rod".

[Article source on the website: hondabook.ru]